Technical Articles

• Things to do after receiving a peristaltic pump

  11/26/2021

  Longer Peristaltic Pump Operational Guide

• L100-1F Example of Multi-step Work Process:Media dispensing

  11/29/2019

  Details: Dispense the media at 10mL/min flow rate for 6 seconds (dispensing volume is 1mL). Dispensing 3 cycles (interval time is 6 seconds), then pump pause. Waits for the external trigger signal, th...

• L100-1F Example of Multi-step Work Process:Gradient Titration

  11/29/2019

  Gradient Titration (flow rate ramp up) Details: Start the pump, then the pump will run 20 minutes later at 10mL/min flow rate. After 20 minutes, the flow rate will ramp up from 10mL/min to 20mL/min wi...

• BZ Peristaltic Pump Head Tubing Loading Instruction (Without Loading Key)

  05/31/2018

  Peristaltic Pump Head

• BZ Peristaltic Pump Head Tubing Loading Instruction (with Loading Key)

  05/31/2018

  Peristaltic Pump Head

• Peristaltic Pump Head KZ25 Pump head installation

  06/02/2017

  The pump head consists of stainless steel rotor, transparent PC housing and PPS compression block. The pump running state is visible through the transparent housing.

• Peristaltic Pump Head KZ25 Tubing load procedure

  06/02/2017

  The PPS compression block has self-lubrication function to reduce the tubing wear. And the tubing could be loaded and removed easily.

• Peristaltic Pump Head KZ25 Outline Dimension and Structure

  06/02/2017

  The pump head consists of stainless steel rotor, transparent PC housing and PPS compression block. The pump running state is visible through the transparent housing.

• YT600-1J Peristaltic Pump Head KZ35 Pump head installation

  06/02/2017

  All the key parts are made by 304 stainless steel material and tubing holders adopt PVDF material.

• Peristaltic Pump Head KZ35 Tubing clamp/connection loading procedure

  06/02/2017

  KZ35 pump head is specially designed and produced for pharmaceutical and food industry according to GMP criteria. All the key parts are made by 304 stainless steel material and tubing holders adopt P...

• Peristaltic Pump Head KZ35 Tubing Mounting mode

  06/02/2017

  The surface of KZ35 is polished to make it easier to be cleaned. Sophisticated structure ensure its stable performace and easy to change tubing.

• Peristaltic Pump Head KZ35 Outline Dimension and Structure

  06/02/2017

  KZ35 pump head is specially designed and produced for pharmaceutical and food industry according to GMP criteria. All the key parts are adopted 304 stainless steel and tubing holders adopt PVDF materi...