Technical Support
- Peristaltic Pump >
- OEM Pump >
- Syringe Pump >
- Micro Piston Pump >
- Pump System >
- Other Pump >
Technical Articles
-
How to use External Control Function for WT3000-1JB
01/20/2017
Communication Control Mode Pump can provide RS485 communication module (see figure 1) to connect upper machine (computer, PLC, SCM).
-
How to use External Control Function for WT3000-1JA
01/20/2017
Communication Control Mode The Pump can to connect to control computer (computer, PLC, SCM) through RS485 serial communication module (see figure 1).
-
How to use Footswitch Control for WT3000-1FB
01/20/2017
Footswitch has two kinds of working modes: Trigger: Press footswitch, the pump starts running; Press footswitch again, the pump stops. Gated: The pump runs as long as the footswitch is pressed.
-
How to use External Control for WT3000-1FB
01/20/2017
Press and turn Knob to highlight the external control line. Press Knob to enter next interface, turn Knob to select On or Off, press Knob for confirmation. Press Exit Key not to store the selection an...
-
WT3000-1FB Micro Gear Pump Dispensing Mode Operation
01/20/2017
Enter Dispensing Mode: Press and turn the knob to highlight Control Mode line. Press Knob to enter next interface, turn Knob to select Dispensing, press Knob for confirmation. Press Exit Key not to st...
-
WT3000-1FB Micro Gear Pump Flow Mode Operation
01/20/2017
Enter Flow Mode:Press and turn the knob to highlight control mode line. Press Knob to enter next interface, turn Knob to select control mode, press Knob for confirmation. Press Exit Key not to store ...
-
How to use Footswitch for WT3000-1FA
01/20/2017
Footswitch connect to external control interface to control the Start/Stop of pump. It can be set in menu according to actual requirement.Footswitch has two kinds of work modes.
-
How to use External Control for WT3000-1FA
01/20/2017
Analog Signal Control Set ‘Analog Signal Control’ in enabling mode. Enter Flow rates interface, press Up Key or Down Key to set the flow rates, press Confirm Key to save the setting or press Return ...
-
WT3000-1FA Micro Gear Pump Flow Mode Operation Procedure
01/20/2017
Dispensing Mode Operation Note: It is recommended installing a one-way valve to prevent liquid reflux which will affect the accuracy of dispensing volume before starting dispensing mode.
-
WT3000-1FA Micro Gear Pump Flow Mode Operation
01/20/2017
Enter Flow Mode: Press Control Mode to enter next interface, press Up Key or Down Key to select Flowrate, press Confirm Key to save or press Return Key to cancel the setting and return to previous men...